How to Install a Chimney Pipe

-          Select a pipe that is approximately ten feet long. 

-          When assembled, the chimney will need to be short when flanked by the chimney and the stove.  Use forty-five degree turns in contrast to ninety degree turns.   If you do have to use ninety degree turns, do so no more than twice. 

-          Use black flue pipes, but avoid types of flue pipes that can vaporize under elevated temperatures.  The flue pipes should be between six to eight inches in total diameter.

-          When assembling the pipe, fasten each joint with a minimum of three screws each, with the assembly being able to expand at the elbows.  One end will need to be attached to a flue collar, and again, with a minimum of only three metal screws.  The other part should be fastened securely to the inside of the chimney, again with a minimum of three screws. 

-          The assembly will be made in a way so that you can clean out the pipes if need be.  You can clean out the pipes by removing the assembly, and remember to do so in a way so that the stove won’t need to be transported.  A flue pipe will not need to go through the ceiling or floor through another room, such as a closet, attic, or open roof space. 

-          One of the goals of installing a chimney fight is to prevent dust and debris from falling outside of the pipe.  There should be no creases or cuts inside of the pipe, and it should be securely fastened at both ends. 

You should assemble the chimney pipe with a single wall flue pipe, and that rises straight from the appliance flue color into the chimney.  

            You could also go with a double flue wall pipe.  Two types of these pipes exist: vented and sealed.  A double wall pipe that is sealed will retain in the warm air in the gases, since the space that’s in between the outer shell and inner liner will be the insulator.  This makes the pipe that is sealed a better choice to minimize the creosote deposits that built up inside of the pipe.  If the chimney assembly will be long, and if gas temperatures are expected to be lower, the sealed flue glass pipe system is by and large the better choice. 

            In contrast to this, the vented double wipe will (as it is vented) allow cool air to move in between both the outer shell and the inner liner.  This is a better system for an assembly pipe that is shorter than usual and doesn’t have to make any forty-five or ninety degree turns and angles.  It is not the most practical option for pipes that need to be longer or that generate low temperatures.  

For More Information About chimney covers Visit Us

What is a Vermiculite Panel?

Vermiculite is a mineral that resembles mica and includes shiny pieces of material that can easily be separated.  Vermiculite is unique because its size can increase many times the original volume when it is heated. This, combined with the incredible lightweight of the material, make it a very useful tool for insulation. Vermiculite has been used as insulation for masonry, concrete, cavity, and cement. It’s even been used as an insulation product for the cement base in many swimming pools. Vermiculite has also been used as insulation for fireplaces, and will therefore work very well for your fireplace and/or chimney as well. 

As vermiculite panels are suitable for various domestic heating appliances, they are definitely something worth your consideration if you have a fireplace in your home. 

What to Watch For

While vermiculite is an excellent insulating material, it can be a potential safety hazard.  This is because vermiculite contains asbestos, which is well known as being a dust hazard in buildings. Make sure you know what you’re doing before installing vermiculite in your home. 

Where Can I Buy Vermiculite Insulation?

-          Vermiculite products can be found at landscaping yards or stores, pool shops or any stores that sell swimming pool products. 

Vermiculite Panels

-          Vermiculite panels are very suitable for various heating appliances due to their durability and high insulating properties.  They will play a vital role in your home for containing heat and for actually enhancing the performance of your fireplace.  They can also be molded into nearly shape that you need them to be, and combined with their efficient cost, this makes them a very attractive appliance material for anyone who has a fireplace in their home. 

-          It’s also possible to mold them into different shapes without the use of expensive, high quality machines and other devices. Besides turning the vermiculite panels into different shapes, you can also create different designs on the actual panel.  Examples include words, phrases, and decorative faces or symbols. Your previously dull fireplace will now be both properly insulated and fare more attractive. With the panels you can create back and side panels, hearth plates, and baffle plates, all with the exact same durability and insulation properties. With higher quality and higher cost vermiculite panels, you’ll get even higher efficiency and reduced emissions. 

Safe for the Environment

-          In addition to their high attraction, durability and versatility, vermiculate panels are very friendly to the environment. Customers of vermiculate panels will be able to achieve neutral Co2 capability in their homes by keeping emissions to a minimum.  Very little Co2 is given off by the combustion process, especially in contrast to fire fuel sources and wood that can be very easily given off.  Think of vermiculite panels as a green solution to your home if you are interested in being friendly to the environment and reducing emissions and fuel consumption.  

 

 Source : Click Here